Without a doubt, maintaining your home requires meticulous care. Benjamin Moore Paint Expert Sharon Grech has the ultimate DIY guide to transform your backyard and enhance your exterior door, fence and patio furniture.

Door painting:

Revamping a door entrance can leave a lasting impression and transforming its personality can be simple with a fresh dose of paint. Improve your entrance and give charisma to your door as Sharon Grech demonstrates how to paint an exterior door.

Door BEFORE – after scraping flaking paint which exposed metal

1. Clean the surface, ridding it of any dirt that may have built up. Degreaser is best to use.
   
2. Scrape and sand door and use a paint scraper to chip off any flaking paint and lightly sand with 150 Grit sandpaper after dry and clean. To prep the surface for primer and paint.
3. Protect any areas that are not being painted by removing hardware and or covering with tape.
   
4. Prime if necessary – in most cases Fresh Start All Purpose primer will be ideal, I used Acrylic Metal Primer since there was exposed metal.
   
5. Lightly Sand after the primer dries using a 150 – 200 fine sandpaper and then with damp cloth or tack cloth, remove any residue.
   
6. Paint! Aura Grand Entrance – It’s a waterborne alkyd, specially formulated for doors.  I used a 2-1/2” angle sash polyester bristle brush and a small microfibre roller.

Door PRIMED

Door AFTER

Fence staining:

Although commonly overlooked, your fence is an integral border for your home. Through the years it faces snow, sunlight, rain, and can soon start to lose its colour and shine. Proper maintenance can keep it from decomposing before its time. Restoring a fence to illuminate its beautiful wood grain is simple, as Sharon Grech shows how through staining techniques.

ITEMS:

ARBORCOAT Stain Testers

ARBORCOAT Stain

Stain Brush

80 Grit Sandpaper

Wood Cleaner

Fence BEFORE

METHOD:

1. Clean fence with wood restorer, then pressure wash and let dry 48hours (or longer).
2. An important step is to sample colours on one fence board– I tested 3 shades of blue, Hamilton Blue, Normandy and Spellbound.
   
3. After, lightly sand with 80 grit sandpaper to remove dead wood fibres. When selecting stain keep in mind 3 main stain opacities depending on aesthetic and function.  Translucent stain is best for newer wood to add slight colour and UV protection. Semi-Transparent stain adds more colour to wood. Solid stain is great for imperfect wood to hide flaws. When applying, brush stain in the direction of the grain.

Fence AFTER

Revamping patio furniture:

Old patio furniture often has great character and rather than replacing the furniture, the right refinement can restore its essence. Sharon Grech delves into how to give an old patio chair and teak table a makeover.

Patio Chair

BEFORE AND AFTER

ITEMS:

Scrapper

80 grit Sandpaper

Degreaser Cleaner

Fresh Start Premium Exterior Primer

Aura Exterior Paint colour Stratton Blue HC-142

Aura Exterior Paint Paper Mache AF-25

2 Paint Brushes

METHOD:

1. Sand the surface to remove dead fibres, I primed it with Fresh Start Primer.
   
2. Then cover the entire surface with Paper Mache AF 25
   
3. Use paper to cover off the area not being painted and keep neat.
4. Take the Stratton Blue HC-142 and paint from top to bottom, then take the Paper Mache AF 25 white AF and paint bottom to top, work your way until the two colours start blending. 
   

Teak Table

BEFORE AND AFTER

ITEMS:

80 grit sandpaper 

Arborcoat Translucent Stain 

A Stain brush

Lint-Free Rag

METHOD: