SUPPLY LIST:

4×4 Cedar post
2×2 Pressure treated – fence boards
Railing pickets
Wood Stain
Hemp Rope
Coated exterior screws
Outdoor wood glue
Wood dowels

The above supplies from:
Home Depot
www.homedepot.com

Crushed stone insert
Stonecote Inc.
http://www.texturock.com

How To:

1.Cut 4×4 posts to length and width appropriate for size of swing you like. You can MITRE ends for a more detailed look.

2.Mark location for lag bolts at Joints to connect corners. Mark these points precisely so that the look will be consistent around all sides.

3.Using a 1” spade bit, drill at marked points to a depth of approximately 1”.

4.Line up the two pieces of 4×4 and using a ¼”wood drill bit, drill through the centre of the hole, right into the adjoining piece. Have someone help hold the join steady as you do this.

DIY project courtesy Ramsin Khachi